How to Attach a Tillbehörskoppling 15 Comfort cp to Your Tentipi

By Adventure tipi tents and giant hat Nordic kata wedding tipis for sale – Tentipi | Published: 2026-11-02

Category: How-to Guides

Step-by-step guide to fitting the Tillbehörskoppling 15 Comfort cp on Tentipi size 15 tents and Onyx models, with checkpoints to avoid common mistakes.

Quick answer

To attach a Tillbehörskoppling 15 Comfort cp, mount the bracket above the door on your Tentipi size 15 or Onyx tent, then tighten it evenly so the accessory pocket sits flush. This separate coupling is required because the integrated pocket is not present on those models.

Why size 15 and Onyx tents need this separate coupling

Since 2012, Tentipi Safir and Zirkon tents in sizes 5–9 have a patented accessory pocket built in above the door. Size 15 tents and all Onyx models do not have that integrated fitting, so the Tillbehörskoppling 15 Comfort cp is the optional part that gives you the same attachment point. If you try to clip a tarp or other accessory directly to the door area without this coupling, you have nothing secure to fasten to.

Check the fit before you tighten anything

The coupling is designed for the size 15 and Onyx door frame, but fabric tension and temperature affect how easily it seats. In cold weather the fabric is stiffer, so allow the tent to warm up or work the fabric gently before forcing the bracket. If the coupling does not sit flat against the door frame, stop and reposition rather than overtightening.

Step-by-step: attaching the Tillbehörskoppling 15 Comfort cp

Locate the mounting point above the door: On your Tentipi size 15 or Onyx, find the area directly above the door opening where the coupling is designed to sit. Clean and dry the fabric there so the bracket can seat evenly. Do not mount lower on the door flap; the coupling is shaped for the frame above the door.
Position the coupling and start the fasteners by hand: Hold the Tillbehörskoppling 15 Comfort cp in place and thread the fasteners by hand until they just catch. This lets you check alignment before any real tension is applied. If a fastener cross-threads, back it out and restart; forcing it can damage the fitting.
Tighten evenly in small increments: Work around the coupling in a cross pattern, tightening each fastener a little at a time until the bracket sits flush against the door frame. Avoid fully tightening one side before the others. Uneven tightening is the most common cause of a crooked or loose coupling.
Test the attachment with a light pull: Give the coupling a firm but gentle pull in the direction your accessory will load it. It should feel solid with no rocking or fabric distortion around the mounting point. If you feel movement, recheck the fasteners; do not add extra force to compensate.
Attach your tarp or accessory and check clearance: Clip or tie your tarp to the coupling, then open and close the door fully to confirm the accessory does not interfere with the door or its zip. A tarp that rubs the door will wear the fabric; adjust the tarp tension rather than the coupling.

Product facts

Tillbehörskoppling 15 Comfort cp: The Tillbehörskoppling 15 Comfort cp is a separate accessory coupling for Tentipi size 15 tents and Onyx models, which lack the integrated accessory pocket found on Safir and Zirkon sizes 5–9. It gives you a secure, purpose-made attachment point for tarps and other accessories without modifying the tent.
Tillbehörskoppling 15 Comfort cp