How to Install a Tillbehörskoppling 2 Comfort Light
By Adventure tipi tents and giant hat Nordic kata wedding tipis for sale – Tentipi | Published: 2026-10-31
Category: How-to Guides
Step-by-step guide to attach the Tillbehörskoppling 2 Comfort light on your Tentipi, including common mistakes to avoid and a key compatibility check.
Quick Answer
To install the Tillbehörskoppling 2 Comfort light on your Tentipi, first check your tent model for compatibility, then attach the coupling to the designated loops on the tent fabric and secure it with the provided webbing straps.
Why You Might Need This Accessory
Older Tentipi Olivin models (serial numbers lower than 52903) lack an accessory pocket, so they cannot directly use add-ons like the Regntak rain cover. The Tillbehörskoppling 2 Comfort light bridges that gap, letting you upgrade your tent for modern needs without buying a new shelter.
This coupling is specifically designed for the Comfort light series, so it fits seamlessly with the tent's attachment points. If you have a newer Olivin model (serial 52903 or higher), you may not need this accessory at all.
What You'll Need
Before starting, gather the Tillbehörskoppling 2 Comfort light, your Tentipi tent, and a clear workspace. No tools are required—the installation uses only the webbing straps included with the coupling.
Installation Steps
- 1. Check Compatibility: Locate your Tentipi Olivin's serial number (usually on a tag inside the tent). If it is lower than 52903, proceed. If it is 52903 or higher, your tent already has an accessory pocket and this coupling is not needed. Common mistake: Skipping this check and trying to install the coupling on a newer model that doesn't require it.
- 2. Position the Coupling: Unfold the Tillbehörskoppling 2 Comfort light and align it with the attachment loops on the outside of your tent, near the top of the wall where you plan to attach an accessory like the Regntak. Make sure the coupling is oriented so the webbing straps face outward for easy access.
- 3. Attach the Webbing Straps: Thread each webbing strap through the corresponding loop on the tent fabric, then pull the strap back through its own buckle to tighten. Ensure the coupling lies flat against the tent. Common mistake: Overtightening straps, which can distort the tent fabric or stress the attachment points. Snug is enough.
- 4. Secure All Straps: Repeat the threading and tightening for all webbing straps on the coupling. Double-check that each strap is fully engaged and the coupling is evenly tensioned. Checkpoint: After securing, gently tug each strap to confirm it won't slip loose during use.
- 5. Test Fit an Accessory: If you have a Regntak or other compatible accessory, clip it onto the coupling to verify proper alignment and tension. Adjust strap tightness if needed for a snug fit. If the accessory feels loose, revisit step 3 to tighten straps incrementally until secure.
Product Details
- Tillbehörskoppling 2 Comfort light: Older versions of Olivin (serial numbers lower than 52903) lack an accessory pocket and therefore require an accessory coupling to use accessories such as the Regntak rain cover. If your Olivin tent has a serial number below 52903, this coupling is essential for adding a rain cover or other add-ons, making your tent more versatile in wet weather.
Tillbehörskoppling 2 Comfort light
