How to Install a Mittstångshängare in Your Tipi
By Adventure tipi tents and giant hat Nordic kata wedding tipis for sale – Tentipi | Published: 2026-10-18
Category: How-to Guides
Learn to install the Mittstångshängare center pole hanger in your Tentipi in 30 seconds. Step-by-step guide for a stable, safe setup.
Quick Answer
Installing the Mittstångshängare takes about 30 seconds. Simply slide the 30 cm hanger onto your tipi's center pole at your preferred height, then tighten the integrated clamp. It fits Tentipi sizes 2, 5, 7, and 9.
What You Need
Before you start, make sure you have the Mittstångshängare (center pole hanger) and your tipi's center pole fully assembled and upright. The hanger is designed for poles in Tentipi sizes 2, 5, 7, and 9, so check that your model is compatible. No tools are required.
Choosing the Right Height
Pick a height that keeps your lantern or light item away from the tent walls and above head level. The hanger holds items with low weight, so avoid heavy gear. A good rule is to place it about one-third down from the top of the pole, where the pole is still thick enough for a firm grip.
Installation Steps
- Step 1: Open the clamp: Hold the Mittstångshängare and squeeze the two sides of the clamp to open it. The clamp is spring-loaded and will stay open while you position it. Common mistake: forcing the clamp open too wide. It only needs to clear the pole diameter.
- Step 2: Slide onto the center pole: Place the open clamp around the center pole at your chosen height. Release the clamp so it grips the pole. Give it a gentle tug to confirm it's seated evenly. Checkpoint: the hanger should sit level, not tilted. If it slips, move it to a slightly thicker section of the pole.
- Step 3: Hang your item: Hook your lantern or light item onto the hanger's loop. Ensure the total weight is low – the hanger is designed for lightweight gear only. Let it hang freely without touching the tent fabric. Safety note: never hang heavy stoves or fuel containers. The hanger is for items like a small lantern or glasses case.
Product Facts
- Mittstångshängare: Mittstångshängaren är ett praktiskt tillbehör som gör det enkelt att hänga upp en fotogenlykta eller andra lätta föremål på tältets mittstång. Med en längd på 30 centimeter är den designad för att passa mittstängerna i tältstorlekarna 2, 5, 7 och 9. Hängaren monteras enkelt på mittstången och sitter mycket stadigt, vilket gör den perfekt för att hålla utrustning med låg vikt. This 30 cm hanger gives you a stable, tool-free mount for a lantern or small items, keeping them off the floor and within reach.
