How to Install a Monteringskryss Cross Bracket

By Adventure tipi tents and giant hat Nordic kata wedding tipis for sale – Tentipi | Published: 2026-10-25

Category: How-to Guides

Learn how to install the Monteringskryss cross bracket for your Tentipi tent. This guide covers the steps, common mistakes, and tips for a secure setup.

Quick answer

To install a Monteringskryss cross bracket, first identify the correct side for your tent model, then use it as a template to mark and drive the stakes at precise positions before raising the tent.

Why the Monteringskryss Matters

The Monteringskryss cross bracket is not just a spare part—it is the template that ensures your Tentipi's stakes go exactly where they need to. Without it, you risk misalignment that can make the tent unstable or difficult to pitch. It comes included with your tent, but buying a spare (available separately) can save time if you lose the original.

Choosing the Correct Side

The Monteringskryss has two sides: one for Safir and Zirkon models of all sizes, and the other specifically for Onyx models. Using the wrong side will give incorrect stake positions, so double-check your tent model before you start. If you are unsure, the side that fits your tent's pole diameter is the right one.

Installation Steps

Identify the Correct Side: Look at the Monteringskryss: one side is marked for Safir/Zirkon, the other for Onyx. Place the correct side facing up on the ground where the center of your tent will be. Common mistake: using the wrong side leads to misaligned stakes. Confirm your tent model first.
Position the Bracket: Align the cross bracket so its arms point toward where you want the tent's main poles to go. Ensure the bracket is level and centered on your chosen spot. Checkpoint: the bracket should be exactly where the tent's center pole will stand.
Drive the Stakes: Use the holes in the bracket as a guide to drive your stakes into the ground at each arm. Drive them straight and deep enough to hold firm, but leave enough height to attach the tent's guy lines. Common mistake: driving stakes at an angle can weaken the hold. Keep them vertical.
Remove the Bracket: Once all stakes are in place, lift the Monteringskryss straight up and off the stakes. Set it aside—you can reuse it later for takedown or future setups. Checkpoint: ensure no stakes are loose before removing the bracket.
Raise the Tent: With the stakes correctly positioned, assemble your Tentipi poles and raise the tent, attaching the pole ends to the stakes. The bracket's guidance ensures a tight, stable fit. Common mistake: skipping the bracket and guessing stake positions often results in a sagging or uneven tent.

Product Facts

Monteringskryss: The Monteringskryss cross bracket is included with your Tentipi tent but can also be purchased separately as a spare part. It has two sides: one for Safir and Zirkon models, the other for Onyx. Having a spare ensures you always have the correct template for stake placement, even if the original is misplaced or damaged.
Monteringskryss