How to Measure with Tentipi Mätband 5-15
By Adventure tipi tents and giant hat Nordic kata wedding tipis for sale – Tentipi | Published: 2026-10-28
Category: How-to Guides
Learn how to use the Tentipi Mätband 5-15 to position your tipi's spikes correctly. Step-by-step guide with common mistakes to avoid.
Quick Answer
Use the Tentipi Mätband 5-15 together with the Monteringskrysset to mark the correct positions for all tent spikes before you pitch your tipi.
Why the Mätband is worth keeping handy
The Mätband 5-15 is included with every Tentipi tipi, but it's easy to overlook once you've unpacked the tent. It's not just a simple tape measure—it's a layout tool designed to speed up setup and ensure your tipi sits evenly.
The band has markings for tent sizes 5, 7, 9, and 15. That means one tape works across multiple Tentipi models, so if you own more than one tipi or plan to upgrade, you don't need a new measuring tool.
Unlike a generic measuring tape, the Mätband is meant to be used with the Monteringskrysset (assembly cross). Together, they help you place every spike in the right spot without guessing or measuring each distance individually.
Trade-offs: when to use it and when to skip it
The Mätband is most useful on firm, flat ground where you can push spikes in exactly where you mark them. On rocky or uneven terrain, you may need to adjust spike positions slightly to avoid buried rocks or roots—so treat the marks as a starting point, not a rigid rule.
If you're setting up in windy conditions, you might want to skip the full measurement and anchor the windward side first, then use the band to fine-tune the remaining spikes. The band is a helper, not a requirement for every pitch.
How to Use the Mätband 5-15: Step-by-Step
- Lay the Mätband flat on the ground: Unroll the Mätband 5-15 on the spot where you plan to pitch the tipi. Make sure it lies flat and straight, with the side showing your tent size facing up. Check that the band is not twisted or folded—this will throw off all your measurements.
- Align the center mark with your tipi's center point: Position the band so that the center mark (or the zero point) sits exactly where the tip of the tipi will be. Use the Monteringskrysset if you have it to help align the band correctly. Double-check the alignment before you start marking—this is the most common source of error.
- Find the markings for your tent size: Look for the set of markings labeled for your tent size: 5, 7, 9, or 15. Each size has its own set of spike positions along the band. Make sure you're reading the correct row—using the wrong size markings will place spikes in the wrong spots.
- Mark each spike position: Use small stakes, chalk, or a marker to mark the ground at each indicated spike position. Work your way around the band, marking all positions for your tent size. Mark all positions before moving the band—removing it early makes it harder to stay consistent.
- Pitch the tipi and secure the spikes: Set up your tipi according to the instructions, then insert the spikes at the marked positions. Use the marks as a guide, but adjust slightly if you hit an obstruction. After securing the first few spikes, step back and check that the tipi looks symmetrical before driving in the rest.
Product Facts
- Mätband 5-15: The Mätband is delivered with all tent tipis, but can also be purchased as a spare part. It has markings for tent sizes 5, 7, 9, and 15. If you lose the original or need a second one for a different tent, you can buy a replacement that works across multiple Tentipi sizes.
Mätband 5-15
