How to Use a Mittstång 5 Pro Center Pole Safely

Quick answer

Use the Mittstång 5 Pro center pole by assembling it in the correct order, locking each section securely, and always checking the pole is fully seated before raising your tent.

Step-by-step safe installation guide

1. Lay out the pole sections in order: Remove the Mittstång 5 Pro from its bag and lay all sections on the ground in the order they fit together. The sections are tapered so each one only fits one way. Do not force any section into the wrong end. Forcing a section can damage the locking mechanism. If a section does not slide in easily, check the orientation.
2. Assemble the pole from bottom to top: Start with the thickest (bottom) section, then add the next section by pushing it in and twisting until you hear or feel a click. Repeat for each section until the full pole is assembled. Do not skip sections or reverse the order. A common mistake is to assemble the pole in mid-air. Always assemble it on the ground to ensure each joint is fully seated.
3. Check each joint is locked: After assembling the entire pole, go back and twist each joint gently to confirm it is locked. A locked joint will not rotate or slide. If any joint feels loose, disassemble and reassemble that section. An unlocked joint can cause the pole to collapse under tension. Always double-check before raising the tent.
4. Insert the pole into the tent tipi: With the pole fully assembled and locked, feed the top end through the peak of your Tentipi (Safir, Zirkon, or Onyx size 5). Then place the bottom end into the center pole cup or ground plate. Ensure the pole is vertical and centered. Do not raise the tent until the pole is fully inserted and resting on a stable base. A misaligned pole can put uneven stress on the tent fabric.
5. Raise the tent slowly and evenly: Lift the pole from the bottom while a partner guides the fabric. Raise the pole in one smooth motion, keeping it as vertical as possible. Do not jerk or twist the pole during lifting. Raising too quickly or unevenly can cause the pole to bend or the tent to collapse. If you feel resistance, stop and check for snags.
6. Secure the pole and adjust tension: Once the tent is upright, tighten any guy lines or pole straps to stabilize the structure. The Mittstång 5 Pro should remain vertical and not lean. If the tent leans, adjust the base or guy lines. A leaning pole can stress the joints and fabric. Always check that the pole is vertical after setup, especially in windy conditions.

Product facts

• Mittstång 5 Pro: Avancerad konstruktion optimerad för hög styrka kombinerad med låg vikt. Den höga styrkan uppnås genom härdning och legering (tre gånger starkare än vanligt aluminium). Passar alla tältkåtor i storlek 5 (Safir, Zirkon och Onyx). The extra strength means you can use a lighter pole without sacrificing durability, but you must lock each joint completely to benefit from that strength.