Stång Absid 7 and 9 Awning Pole: Installation Guide

Quick Answer

Install the Stång Absid 7 or 9 pole by first securing the base, then raising the pole to the awning attachment point, and finally tensioning the fabric. Follow the steps below to avoid common mistakes.

Installation steps for Stång Absid 7 and 9

1. Prepare the awning and pole: Lay the awning flat on the ground near the tipi. Unfold the Stång Absid pole and check that all sections are fully extended and locked into place. Check that the pole sections are firmly locked before proceeding.
2. Attach the pole base: Insert the base of the pole into the dedicated grommet or pocket at the bottom edge of the awning. Make sure it sits securely and is oriented correctly. A loose base will cause the pole to shift during setup.
3. Raise the pole to the awning peak: Lift the pole upward, guiding the top end toward the awning's peak attachment point. Ensure the pole follows the seam line of the awning for even tension. Keep the pole aligned with the seam to avoid twisting the fabric.
4. Secure the top attachment: Connect the top of the pole to the awning's peak loop or clip. Verify that the connection is snug and that the pole is fully seated. A loose top connection can cause the awning to sag.
5. Tension the awning: Adjust the pole's angle and length (if adjustable) to create a taut, wrinkle-free surface. Stake down the awning's corners to lock in the tension. The fabric should be smooth; wrinkles indicate uneven tension.
6. Test stability: Gently push on the awning from different angles to check for movement. If the pole shifts, re-tighten the connections and adjust the stakes. A stable setup will not wobble or sag under light pressure.

Product facts

• Stång Absid storlek 7 och 9: The Stång Absid is a spare pole for the awning, with an advanced construction optimized for high strength and low weight. This means the pole is easy to handle during setup while still providing reliable support for the awning, even in challenging conditions.